会计规划英文范文

会计规划英文范文（10篇）

1.会计规划英文范文 篇一

一.Teaching aims Words: barbecue 烧烤，sauce酱料，spices香料，seafood海鲜，chicken drumsticks鸡腿，chicken wings鸡翅，vegetables蔬菜 Sentences: What would you like I like orange juice.二.Teaching aids: present food 三.Teaching process(一)Greeting T: Good morning,everyone.I am Sally.S: Good morning, Sally.T: How are you today S: We are very good and happy.(二)Warm up Bar-bar-bar, be-be-be, cue-cue-cue, Barbecue.(Say them and Clap your hands)(三)Short lesson T: Look at the these food.Words: barbecue 烧烤，sauce酱料，spices香料，seafood海鲜，chicken drumsticks鸡腿，chicken wings鸡翅，vegetables蔬菜

Game: 1.I say, and you show the food 2.I say,and you touch the food 3.You can say the food I show, then you can eat it S:……

T: What’s your favorite barbecued food, can you tell me.S:…..T: Play a game.As much food as you can talk at a time, you will get a gift.Who can try….S:….T: Now it’s your barbecue time.Just enjoy… S:……

2.英文试讲稿[范文模版] 篇二

We have discussed how to simplify a logic function using logic algebra.This method relies on the skill of the individual in applying the appropriate rules.Sometimes it is hard to be sure whether the logical function is already simplest form or not.Now we will introduce a new method, which is graphical, known as the Karnaugh map.It’s a tool for performing the simplification of logic function.2 first, we must know what is the K-map, and how to design it!Usually, the K-map is made up of 3 parts, and the 3 parts are variables, cells and binary numbers.Ok, we can get 2 k-maps, you should note each map includes 3 parts.Please remember the 3 parts, when you design k-maps, each of the parts is essential.we note the first map has 2 variables, it has 4cells, and the second map has 3 variables, it has 8 cells.So in an n-variable k-map, there are 2 to power n cells.4 then please observe the binary numbers on the upper and left side of the k-map.What do you discover from the changed values? Take the numbers on the upper side as example, look at the first map, the numbers is changed from 0 to 1 between adjacent cells, only one-bit is changed, of course, the number just has one-bit.On the second map, each number has 2 bits, the number is changed from 00 to 01, from 01 to 11, from 11 to 10, between the adjacent cells, there is only one-bit in the number changed.If we change the position of the 2 binary numbers, do you think this sequence is right? No!It’s not right, because the number is changed from 01 to 10, two bits are changed.So you should know there is only a single-variable value changed between adjacent cells.This is one of the K-map’s features.5 we look at other features.On the fist map, Cell 1’s adjacent cells are cell 2 and 3, it’s easy to understand.What are the cell 4’s adjacent cells? They are also cell 2 and 3.But on the second map, cell 3’s adjacent cells are cell 1, 4 and 7.This is easy to understand.Now please give the cell 1’s adjacent cells!You may list cell 2 and 3, it’s right, but it’s not all right, because you ignore the cell 5.Do you know what that is on the left side of cell 1? In fact, cell 5 is on the left side of cell 1, of course, cell 6 is on the left side of cell 2.In this case, adjacent cell include the cells located in the symmetric place.I hope everyone should note this.6 this is a 4-variable K-map.Please give the cell 11’s adjacent cells!Now you should know except cell 12 and 15, cell 3 and 9 are cell 11’s adjacent cells.Cell 3 is on the right side of the cell 11, and cell 9 is on the lower side.7 Ok, let’s summarize the feature of K-map.Fist, if a k-map has n variables, it must possess 2 to power n cells.Second, when you design a k-map, please note how to change the binary number on the upper and left side, there is only a single-variable value changed between adjacent cells.Third, it’s easy to find a cell’s adjacent cells, but I must emphasize that you don’t ignore these cells located in the symmetric place.Please care about these, it will easy for you to make use of K-map.8 after discussing K-map, let’s learn how to represent a truth table on k-map.Here is an example.This is a truth table of a 3-variable function, the knowledge about the truth table has been discussed earlier.The key step is to design a K-map, we know the function has 3 variables, the k-map also has 3-varibales, according to the features of k-map, there are 2 to power 3 cells in the K-map, they are 8 cells.Then the binary numbers will be written, you seem to note there is only single-variable value changed between adjacent cells, we have drawn a K-map.The second step is to mapping the logic function.It is an easy work for you to enter the value of the output variable Y in each cell.On the K-map, cell 0 corresponds to row 0, because the variables’ value are same, a is equal to 0, b is equal to 0, c is equal to 0, so we should enter 0 in cell 0.Cell 1 corresponds to row 1, a is equal to 0, b is equal to 0, c is equal to 0, enter 1 in cell 1.so we can draw a conclusion if all variables’ value on the map is same as those in the table, enter output value in corresponding cell.Ok, fig.5.3 gives the complete K-map of the truth table.Look at this example 2, this equation is in SOP form, first we should convert it into standard SOP, and then it can be represented on K-map.Observe this equation, this term and this term are not minterm.Although minterm and SOP form are discussed early, I think it’s necessary to review this knowledge.Minterm is also called standard product form, we look at example 2, the 3 terms are product form.This and this terms are only product form, they are not standard product form.But this term is standard product form.What’s minterm? A function has n variables, if the product term contains n variables, each variable may be in complemented form or in uncomplemented form.The product term is called a minterm or standard product form.11 of course, it’s easy to understand that if a function has n variables, there must be 2 to power n minterms.There are 3 variables A,B,C, so we can write 8 minterms.12 if the logical function is represented as a sum of minterms only, the function is said to be in standard sum of products form.This expression is not in standard SOP form, because this and this term are not minterms, and this expression is in standard SOP form.13 In fact, the logical function can be converted into standard SOP form.We know the C plus the complement of c equal 1, any term multiply 1 equal itself.So if the fist term multiplies this expression, it can be converted into two minterms, the two sides of the equal mark are equivalent.The second term can be converted into two minterms by the same way.We can get a standard SOP form.14 the represent the SOP form on K-map.15 According to minterm’s features, logical 1 corresponds to the original variable, logical 0 corresponds to complement of variable.When a equal 0, b equal 0, c equal 0, we can get this minterm, this term corresponds to this cell.In fact, the K-Map includes all minterms.16 the first term corresponds to this cell, so we enter 1 in this cell.the second term corresponds to this cell, so we enter 1 in this cell.the third term corresponds to this cell, so we enter 1 in this cell.the forth term corresponds to this cell, so we enter 1 in this cell.the fifth term corresponds to this cell, so we enter 1 in this cell.17 Ok.The equation in standard SOP form is represented on K-Map.18 this section is very important.It is well-known that K-map is perhaps the most extensively used tool for simplification of logical function.Ok, let’s look at how to simplify logical function using K-map.We will illustrate every step through a example so that you can understand this method easily.Let’s look at the fist step, Mark those cells with a 1 that correspond to the terms in expression.Here is an equation in standard SOP form.After designing a k K-map, enter 1s in corresponding cells.So we get fig 5.6.19 Form the 1s into the largest valid group.Some conditions limit the largest group.The group must be a rectangle, and must contain 2 to power i cells, i is equal 0, 1, 2, n.n is the number of variables.When you face this K-map, how to make valid group, on the left side, there are 3 ones, on the right side, there are 2 ones.The 3 ones couldn’t form a group, because it is not rectangle, and it has 3 cells, normally, the group should contain 1, 2, 3, or 8 cells.But these 2 ones can form a group, these and these also can form a group.u should remember this cell and this cell are adjacent, this cell is on the left side of this cell, this cell is in the right side of this cell, the two cells are the same.So these 4 cells should form a group, and it also satisfy the demand of form the largest group.ok we have formed two groups Step 3 each 1 on the map must be included in at least one group.The ones already in a group can be included in another group as long as the overlapping groups include noncommon ones.Please note this cell, it isn’t only in the group, but also in this group, it belongs to the two groups, these 2 groups are permitted.Because the 2 overlapping groups include noncommon ones.Except this cell , this group has this cell, this group has this, this and this cells.21 Step 4 will give us a rule about how to produce terms.Identify adjacent ones in a group, then see the values of the variable associated with these cells.If the variables will be different and they gets eliminated.Other variables will appear in ANDed form in the term.This map exist 2 groups.We observe this group first, the value of variable C is not changed, it is equal to 1.the value of A is also not changed, it’s equal to 0, but look at variable B, the value is changed from 0 to 1 between adjacent cells, variable B should be eliminated.The other two Variables A, and C will appear in ANDed form in the term, I have to emphasize that this term is written by the method of producing minterm.0 corresponds to complemented variable, 1corresponds to uncomplemented variable.So we get this term.Then we observe this group include 4 cells, the value of variable B is not changed, the others will be eliminated.We get the complemented B.two groups get 2 terms.22 step5 these terms are ORed to get the simplified equation in SOP form.This equation is previous, and this is simplified equation, in fact, it’s a simplest expression, these two equations are equivalent.Now, we have simplified a logical expression using K-map, do you find it is a simple and efficient method? Remember these 5 steps, they are useful.23 After this chapter, we should appreciate the two points.First, you must know how to design a K-map;it’s a basal and important knowledge.When you design a K-map, you should pay more attention to these details.Second, simplification a logical expression using K-map method, we know this method is simplest and most commonly used method, it’s an essential knowledge in this chapter and easy for you to be operated, I will give you some homework to practice yourselves, they are 7, 12, 16, and 18 on the page 188 and 189 respectively.Please treat them seriously, you will get promoted.

3.英文面试常问问题（范文） 篇三

what types of prospective job tasks do you enjoy the most？which prospective job tasks do you least care to do﹖

主要考察应聘者会否对工作中的很多地方感到厌倦；另外还考察你对自己的喜好是否诚实，你是否了解这份工作的基本职责；你是否认识到任何职业都会包含一些枯燥无味的日常工作。

what is your greatest weakness﹖

不要把那些明显是优点的品行当成缺点说，这种落入俗套的方式早已被面试官厌倦。可以说一些对于你应聘这个职位没有影响的缺点，对于那些在面试中已经表现出的明显弱点，你可以利用这个问题加以弥补，显示你早已意识到，并且正在改进，已经取得了较大进展。

主要考察你的职业目标是否符合公司的要求；这份职业是否是你达到目的的合理选择；你是否有继续发展的热情；你的野心是否和这份职业的要求相契合；你的发展潜力有多大。如果你应聘大企业，千万不要提你想创业，如果应聘小企业，这倒是个合理的回答。

what college subjects did you like best and least﹖ why﹖

这个问题用来发现应聘者是怎样类型的人。即使你喜爱的课程与专业无关，也要表现出它对你申请的工作有所帮助。

what is your class rank and your grade point﹖ why are your grades so low﹖

如果你的成绩不好，你要准备好适当的解释。

what are your interes0824ts on outside work﹖ what campus or community activities have you been involved in﹖

列举主要的一两个兴趣爱好即可，强调自己有很多兴趣爱好容易使人怀疑你有多少时间用来工作，还可能导致面试官对你的夸大其词的厌恶。

what adjectives would you use to describe yourself﹖

无论词藻华丽与否，一定要体现自身的特点，并且与众不同。务必为每个词准备好具体的例子。

how do you deal with someone in your group who isn’t pulling his or her weight or disagree with your goals﹖

考察你的团队合作能力和领导能力。用激励代替批评。回想那些你试图鼓励他人，并使他改变初衷，转为赞同你的观点的例子。

what position do you normally take on a team﹖

考察你的团队合作技巧。不要把自己形容为一个跟随者或是领导者。公司希望你在团队合作中不懂时提出问题，必要时帮助他人，承担责任，做出贡献。好的合作者在团队中的角色是动态的。

tell me what you’re most proud of on your experiences﹖

这个问题几乎是每一位求职者必然面对的问题，最好挑选能够体现公司希望看到的素质的事例。

what is the worst mistake you’ve ever made﹖

4.外资企业英文缩写（范文） 篇四

PE: Products Engineer;生产工程 Process engineer 制程工程 TE: Test Engineer 测试工程

ME: Manufacturing Engineer;制造工程;Mechanical Engineer 机械工程 IE: Industrial Engineer 工业工程 DCC: Document Control Center 文管中心 BOM: Bill OF Material 材料清单

ECN: Engineering Change Notice 工程变动公告

TECN: Temporary Engineering Change Notice 工程临时变动公告

ATY: Assembly Test Yield Total Yield 直通率 TPM: Total Productivity Maintenance PM: Product Manager;Project Manager ECR: Engineering Change Request 工程变更申请 ECO: Engineering Change Order 工程变更指令 EN: Engineering Notice 工程通报 WPS: Work Procedure Sheet 工作说明书

ICT: In Circuit Test 电路测试

P/R: pilot run;C/R control run T/R trial run 试做 EVT: Engineer Verification Test 工程验证测试 DVT: Design Verification Test 设计验证测试

MVT: Mass Verification Test 多项验证测试 ORT: On Going Reliability Test 出货信赖性测试 S/W: software 软件 H/W: hardware 硬件

DCN: Design Change Notice 设计变更通知 PVT: Production Verification Test 生产验证测试 MTF: Modulation Transfer Function 调整转换功能 CAT: Carriage Alignment Tool 载器调整具 ID: Industrial Design 工业设计(外观设计)PCBA: Printed Circuit Board Assembly 电路板组装 F/T: Function Test 功能测试

CCD: Charge Coupled Device 扫描仪之读器 ERS: External Reference Spec 外部规格

PMP: Production Management Plan 工程管理计划 SOP: Standar Operation Procedure 作业标准书 QRA: Quality reliability Assurance 品保部

ESD: Electrical Static Discharge 静电释放或静电防护 OAY: Output Accept Yeild 直通率

VMI: Visual mechanical inspection 外观检查 PK: Packing 包装

FQA: Final quality assurance 质量追踪 CE: Component engineer 材料工程师 EE: Electronic engineer 电子工程师 EVT: Engineer verification test 工程验证测试 WIP: Working in process inventory 在制品

QA Quality Assurance 质量保证

QRA :Quality & Reliability Assurance质量与可靠性保证 MQA :Manufacturing Quality Assurance 制造质量保证 DQA: Design Quality Assurance 设计质量保证 QC: Quality Control 质量控制

IQC: Incoming Quality Control 进货质量控制 VQC: Vendor Quality Control 售货质量控制 IPQC: In Process Quality Control 制程质量控制 OQA: Out going Quality Control 出货质量控制 QE: Quality Engineer 质量工程

AQL: Acceptable Quality Level 可接受的质量水平DPPM: Defective Pieces Per Million units 百万件中有损件数 PPM: Pieces Per Million 百万分之一 CS: Custom Service 顾客服务

MRB: Marerial Review Board

材料审核委员会 DMR Defective Material Report 材料缺陷报告 RMA: Return Marerial Administration 材料回收处理 Life Test 寿命测试

T/C: Temperature Cycle 温度循环 H/T: High Temperature Test 高温测试 L/T: Low Temperature Test 低温测试

ISO: International Standard Organization 国际标准化组织 SPC: Statistic process control 统计过程控制

5S: Seiri Seito Seiso Seiketsu Shitsuke整理.整顿.清理.清扫.素养 VMI: Visual Mechanical Inspection 外观机构检验 MIL-STD: Military Standard 美军标准 SPEC: Specification 规格

AVL: Approval Vendor List 合格厂商 QVL: Qualified Vendor List 合格厂商 FQC: Final Quality Control 最终质量控制 OBA: Open Box Audit 成品检验

EAR: Engineering Analysis Request 工程分析需求 FAI: First Article Inspection 首件检验

VQM: Vendor Quality Management 厂商质量管理 CAR: Corrective Action Request 改进对策要求 4M: Man;Machine;Material;Method 人,机,材,方法

5M: Man;Machine;Material;Method;Measurement 人,机,材,方法,测量 MTBF: Mean Time Between Failure平均寿命 TTL: Total

FIN Finance&Accounting 财务与账目 P&L: Profit & Lose PV : Performance Variance 现象差异 3 Element of Cost = M,L,O M: Material 材料

L: Labor 人力

O: Overhead 管理费用

Fix OH Fix Overhead 固定管理费用 Var OH Variable Overhead 不定管理费用 COGS Cost Of Goods Sold 工厂制造成本 AR: Account Receivable 应收 AP: Account Payable 应支

MIS Management Information System 资迅管理系统 IS: Information System 资迅系统 IT: Information Technology 系统技术 MRP: Material Requisition Plan 材料需求计划 I2:Information Integration System 资迅整合系统 SAP: System Application Programming 系统申请项目 ERP: Enterprise Resource Programming 企业资源项目 HR Human Resource 人力资源 PR: Public relation 公共关系

T/O: Turn Over Rate=Monthly T/O Total People*12 GR: General Affair 总务

Organization 组织 HQ Head Quarter 总公司 Chairmen 主席 President 总裁

Executive Vice President 常务副总裁 Vice President 副总裁

HR Human Resource 人力资源部 FIN Finance 财务 Sales 销售

R&D: Research & Developing 研发部 QA: 质量保证 QA DQA CS MIS: Management Information System 资迅管理系统 PUR 采购 Purchasing IMD: Image Management Division 影像管理事业部 ITS: Information Technology System 计算机部 QRA: Quality Reliability Assurance 品保部 MFG: Manufacturing 制造部

PMC: Production & Material Control 生(产)物(料)管(理)

Materials 材料

PC: Production Control 生产控制 MPS: Mass Production Schedule 量产计划 FGI: Finished goods Inventory 成品存货 UTS: Units To Stock 存货单元

WIP: Working In Process Inventory 在制品 C/T: Cycle Time 循环时间,瓶颈 WD: Working Days 工作天

MTD: Month To Days 月初到今日(例如总表整理)YTD: Year To Days年初到今日 SO: Sales Order 销售清单 MO: Manufacture Order 制造清单 BTO: Build To Order 订单生产 P/N: Part Number 料号 MC: Material Control 材料控制

MRP: Material Requisition Plan 材料需求计划 INV: Inventory 存货清单

Inv Turn Over Days=INVS/NSB X WD 库存周转天数 PSI: Production Shipping Inventory 预备待出货 JIT: Just In Time 实时 Safety Inventory 安全存量

CKD: Completed Kits Delivery 全件组装出货 SKD: Semi Kits Delivery 半件(小件)组装出货 W/H: Warehouse 仓库 Rec: Receiving Center 接收中心 Raw MTL 原物料 F/G: finish goods 成品 Import/Export 进出口

SI: Shipping Instruction 发货指令 PL: Packing List 包装清单 Inv: Shipping Invoice 出货发票 ETA: Estimate Arrive 预估到达时间 ETD: Estimate departure 预估离开时间 BL: Bill of Landing 提货单(海运)AWB: Air Way Bill 提货单(空运)MAWB: Master Air Way Bill 主提货单 HAWB: House Air Way Bill 副提货单

TEU: Twenty foot Equipment Unit(Contain)二十英尺货柜 FEU: Forty foot Equipment Unit(Contain)四十英尺货柜 CY: Container Yard 货柜场

THC: Terminal Handing Charge 码头费 ORC: Original Receiving Charge 码头费 PUR: Purchasing 采购

FOB: Free on Board 货运至甲板(离岸价)CIF: Cost Insurance Freight 成本+运费+保险 OA: Open Account 开户 TT: Telegram Transfer 电汇 COD: Cash On Delivery CRP: Cost Reduction Program 降低成本方案 PR: Purchasing Requisition 采购申请 PO: Purchasing Order 采购单

MFG Manufacturing Production 制造生产 DL: Director Labor 直接人工 IDL: Indirect Labor 间接人工 DLH: Direct Labor Hours 直接工时 Productivity=UTS/DLH PPH: Pieces Per Hour 每小时件数 Efficiency=Actual/Target(%)DT: Machine Down Time 停机时间 AI: Auto Insertion 自动插入 MI: Manual Insertion 人工插入

SMD: Surface Mount Device 表面粘着零件 SMT: Surface mount technology 表面粘着技术

B/I: Burn In(for how many hours at how many degree)烧机 WI: Work Instruction 工作说明

SOP: Standard Operation Procedure 作业指导书 R/I: Run In 运转机器

5.销售人员英文求职信范文 篇五

Dear sir,Four years as a senior clerk in sales department of the New World Products Company have,I believe,given me the experience to qualify for the job you advertised in Thursdays newspaper.Since 1981 I have been responsible for all office details in the administration of sales,including writing much of the correspondence.In the course of my work,I have become familiar with the various sales territories,and have also in my spare time experience of handling business problems other than my proper sphere.The years before I was employed at the New World,I was a secretary for Long Brother,an accounting firm.There I became familiar with accounting terms and procedures.I was graduated at Wah Yan College, in June 1974.I am twenty-five years of age and single.I am leaving my present position because I can use my capabilities more fully in a position with wider scope.My present employer knows of my ambition and is helping me to find a new place.May I see you at your office to tell you more about myself and show you just how well I can do the work you require.Yours faithfully

6.会计规划英文范文 篇六

1)the immediate schemes

2)detailed information such as dates，related persons and numbers

WORK-IN-PROGRESS REPORT FOR THE MONTH OF MARCH，2002

From：Anny lee，Head，Academic Department

To：Mr Ng sik-hung，Chairman Shang Hai Evergreen Association

Ref：0091963

Date：2 April 2002

Ⅰ.Shang Hai Secondary School

1.The number of students for the month is：Form 1：329，Form 2：300，Form 3：500，Form 4：238，Form 5：234

7.郴州中英文介绍词范文 篇七

In 2015, a world class grand meeting will be held in this miracle city full of the essence of nature.The rippled Chenzhou International Convention Center, like mountain and water, with an indoor exhibition area of 60000 sqm, is a large and multi-functional exhibition site with the large scale, fullest equipped function and highest professional level in Hunan Province.There are 2500 international standard exhibition booths in this Mineral & Gem Expo, which attracts more than 2000 exhibitions from over 70 countries.Thus, its scale ranks the third in the world and the first in Asia.“This is an expo held at the pithead.” Chenzhou, will live up to the choice of the world!2015年，一个世界性的盛会将在这座凝聚着天地精华的神奇之城召开。如山水般波澜起伏造型的郴州国际会展中心，室内展览面积达60000平方米，湖南省市州中规模最大，功能最齐全，专业水平最高的大型现代化多功能展览场所。本次矿博会设2500个国际标准展位，吸引逾70个国家的2000余名展商参展。是世界前三，亚洲最大的矿物化石宝石展。“这是一个开在矿进口的博览会”郴州，价格无愧于世界的选择。

Chenzhou, located at the foot of the north of the FiveRidges at the cross border of Hunan and Guangdong, is a Huaxia geologic structure unit.In the endless geologic age, Chenzhou totally experienced four important tectonic deformation periods and four corresponding magmatic activities.Its unique geological basis, not only creates cent “area accumulated with a huge amount of metals”, but forms beautiful mineral crystals in all forms.郴州，地处湘粤文化交接的五岭北麓，隶属华夏地质构造单元。在漫长的地质年代里，郴州共经历了四次重要的构造变形期。独有的地址基础，不仅塑造出宏伟瑰丽的“巨量金属堆积区，也形成了姿态万千美丽无比的矿物晶体。

According to incomplete statistics, more than 200 kinds of minerals have been found within the territory of Chenzhou, among which, reserves of tungsten, bismuth, molybdenum and amorphous graphite rank first nationwide, those of tin and zine rank the third and fourth respectively, and that of fluorite accounts for more than half of the whole nation.据不完全统计，郴州境内已发现矿物200多种，其中钨，铋，钼微晶石墨注量居全国第一；锡，锌储量分别居全国第三 第四位，萤石储量占全国的一半以上。

The maganifent mineral crystal is the pride of Chenzhou, 80% of the mineral crystals in China are produced in Chenzhou, and 150 kinds of valuable minerals known in the world can be found in Chenzhou.The mineral crystal in Chenzhou receives worship of international collectors because of its multiple variety, large quantity, bright colour, perfect crystal, diversified combination and peculiar shape.Scheelite, blende, swallow tail twin, bournonite… that have been treated as treasure by collectors are not hard to be found in Chenzhou.In overseas famous expo, the price of these mineral crystals reached tens of thousands of dollars and even higher many year ago.The large vug with green fluorite and calcite is the most valuable treasure of the Geological Museum of China.美轮美奂的矿物晶体是郴州的骄傲，中国80%的晶体产自郴州，世界上已知的150种有用矿物在郴州都能找到。郴州的矿物晶体因品种多，数量大，色彩鲜艳，晶体完美，组合多样，造型奇特二备受国际收藏家推崇。白钨，闪锌矿，燕尾双晶，车轮矿，这些令藏家们听名字就眼睛发亮的珍宝，在郴州都不难见到。在国外知名的博览会上，这些晶体的价格，多年前已轻易达到数万美元升值更高。绿萤石，方解石相互嵌生的大型晶簇，为中国地质博物馆镇馆之宝。

The hsianghualite which is the national treasure of the field of geoscience and well-known in the world is harder to be obtained even with a lot of money.According to rough statistic, the quantity of mineral crystal exploited in Chenzhou is 230,000sqm and the prospective quantity is 6 million sqm including 1.32million that can be exploited.Mt.Yaogangxian,Shizhu Park,Mt.Haianghualite and Leiping, etc.have become internally known mineral crystal production areas.As tin ore belt at Mt.Qitian is found in large scale, more beautiful mineral crystals will be found underground in Chenzhou.在地址学界独享“国宝”级地位，蜚声全球的香花石更是千金难求。据粗略统计，郴州矿物晶体已采资源量23万方，保有远景资源量600万方，可采132万方。瑶岗仙，柿竹园，香花岭，雷坪等矿区，已成为国际知名的矿物晶体产区。随着骑田岭大规模锡矿带的发现，郴州将有更多奇艳亮丽的矿物晶体从大地深处走来。

Chenzhou,a mineral city can be said to be a place that knows mineral crystals the best in China.。There are more than 80,000 people engaging in mineral crystal production and distribution, and relevant employees even reach 600,00.Thus,any mining worker can be a great collector of mineral crystal.As more and more people begin to engage in collection,the scale and grade of the collections become increasingly higher.Chenzhou develops intoa rare stone culture market integrating production,supply,sale,appreciation and collection gradually.Local government’s attention and support accelerate the formation of this industry chain.矿都郴州，堪称中国最懂矿晶的城市这里，直接从事矿晶产销行业的人数就达8万多人，相关从业人员更是接近60万。随便一个采掘工人都有可能就是一位矿物晶体的大收藏家。随着收藏的人越来越多，藏品的规模和档次也越来越高。郴州逐渐形成了集产.供.销.赏.藏为一体的奇石文化市场，当地政府的关注和扶持加速了这一产业链的形成。

Up to now, there are over 500 ornamental stone venues of various kinds, including 3 official museums covering an area of over 10000 sqm, and more than 50 large private museums.The annual output value of mineral crystal dominated ornamental stone industry , has exceeded RMB 500 million yuan, and the annual trading volume surpassed 300 million yuan.There are 15 top collectors who purchase mineral crystal of over 10 million US dollars.截至目前，全市已拥有各类观赏石场馆500余家，其中，面积1万平方米以上的官方博物馆就有3家，私人大型博物馆50多家。全是以矿物晶体为主的观赏石行业年产值已超过5亿，年交易量超过3亿，购买矿晶1000万美金以上的顶级收藏家就有15人。

In recent years, 7 rare stone expo and exhibition activities like mineral crystal have been held in Chenzhou one of another which made great success and raised extensive at home and abroad.On Dec.1.2011 the 2nd International Forum and Expo for Competitive Products of Mineral Crystal in China opened, attracting about 80000 persons including mineral experts, collectors and distributors from 23 countries and regions to Chenzhou.近几年，郴州前后举办了7次矿物晶体等奇石展览展销活动都取得了重大成功，引起了国内外的广泛关注。20111年12月1日，中国第二届矿物晶体国际论坛暨精品展盛装启幕，引起了23个国家和地区的矿物专家，收藏家及经销商约8万人聚集郴州。

8.会计规划英文范文 篇八

上大学时，我曾是优秀的学生干部，经常负责组织一些学术活动。在这些活动中既锻炼了自己的组织协调沟通能力，也提高了自己对社会的认识。工作以后，我从事工业财务统计与文秘综合工作，通过财务报表整理和撰写综合稿件，专业能力和文字水平都得到锻炼和提高。由于工作认真出色，我在2012年被评为全省联网直报优秀工作人员。但作为一名在职人员，对知识和技能的需求是迫切的，所以我如果能够幸运地成为兰州大学MBA研究生，我会向各位老师和同学虚心请教，努力学习并在工作中认真领会，提高自己在组织管理、沟通等方面的能力，为未来事业打下更加坚实的基础。

Good morning!I am very gald to be here.My name is lixue,26-years

old.When I was a student in North West Normal University,I always liked to join in varities of activities and became a student cadre of the Student Union.In addition, My major is Finance,the undergraduate education gave me a wide range of vision and taught me how to cooperate with others.After graduating from school ,I worked in Gansu Provincial Bureau

Statistics.The following theer-year working experience offered me a good chance to give full play to my creativity and intelligence.In my work, I found

9.英语专业英文求职自荐信（范文） 篇九

To whom it may comcern：

Hi, my name is cnrencai.I entered XX school in XXXX.Majoring in English，during my study.I work hard and sometimes won the scholarship.I take part in all kinds of activities and I hope to appty for the position of teacher.I want to be a teacher, because I love this job when I was young, my dream is to be a teacher.If I can get a chance to be a teacher in your school.I will put all my hart to do a good job.I am very interested in English, especially in reading listening, speaking.Every morning I love to read English loudly.I can full scope to show my ability during the hard work of my study.I am sure I will be a good teacher.As the old saying:"It’s never too old to learn.” So I will never give up any studying chance.So I hope you can give me a chance.Thank you!

Sincerely,

10.英文职业规划职业规划 篇十

我期望把自己最好的计划应用到一种新型产品中去。

I’ll do my utmost if your company hires me.

如果我被贵公司录用，我将竭尽全力做好工作。

I will make a long-term plan. I’ll go with all my efforts to see it is realized.

我会制定一个长远的发展计划。我将竭尽全力实现计划。

First, I’ll get further information about our goal, ways and counterparts, management, etc. Then, I will make my plan.

首先，我要进一步弄清我们的目标、途径和对手、管理状况等。然后，我要制定出计划。

What is most important for me now is to do the best possible job for the company and learn and develop my skills as much as possible.

现在对我来说，最重要的是做好我的本职工作，同时尽可能学习和提高自己的 工作能力。

My career goal is to work at increasingly larger firms and take on more challenging assignments.

我的职业目标是在不断扩大的大公司里做更有挑战性的.工作。

One of my ambitions is to become our representative in America. In order to achieve this goal, I just want to work step by step.

我的抱负之一是成为我们公司的驻美代表。为了达到这个目标，我只想一步一

I hope I can bring what I’ve learned into full play here, and be a good engineer.

我希望我能在这里充分施展我所学的知识，成为一名优秀的工程师。

I would like to join the research and development department and to get involved in developing new products.

我想加入研究发展部门，并致力于发展新产品。

My ambition is to become a linguist, and be fluent in Chinese, Japanese and English.

我的志向是成为一名语言专家，能说流利的中文、日语和英语。

I want to apply my knowledge and experience to a challenging position and finally move on to management level.

我希望把我的学识及经验用于一份具有挑战性的工作，最后希望能晋升管理阶层。

当然，HR也会这么问你

What is your aim in going into the field of education?

你进人教育界有什么目标?

Do you have any ambition for the future?

你对将来有什么抱负?

What is your career objective?

你的事业目标是什么?

What specific goals related to your occupation have you established for yourself for the next ten years?

未来中，你给自己确定了哪些与你职业有关的具体目标?

Where do you want to be 5 years from now in your career?

5年年内你的事业想达到什么水平?

What is your long-range objective?

你的长远目标是什么?

Could you project what you would like to be five years from now?