保护濒危动物英语作文「中英对照」

保护濒危动物英语作文「中英对照」（共10篇）（共10篇）

1.保护濒危动物英语作文「中英对照」 篇一

This afternoon, I turned on the computer on the qq, and saw in qq space “simply make the gods cry”.

Some people are ready to take the little bears bile. At that time, break the cage, a mother bear with huge PAWS strangled little bear, then her head hit the wall and died. Maybe it is their best way to them, because they are relieved.

After I read this story, I almost cry. So cute teddy bear, so the great bear, who is cruel killed them? Is human. Who is the one who claim to protect giant pandas? As humans. This is not a contradiction? The giant panda is a national treasure in our country, but as soon as I saw some pandas humans want to flee. Why is this? Because someone hurt the panda.

The panda is so cute! They also have life, they are not rich. We must protect the panda, some panda has been found, there are some pandas still suffer from the endless pain. We want to be treated, if they are they, by this pain?

Here, I appeal to everyone: love animals, let animals no longer afraid of us, let the world become real peace!

At the same time I also urge those who hurt the panda: panda also have life, pandas have feelings. Their value is not let us make a living, but live for yourself. I hope you can stop here!

2.濒危动物保护措施 篇二

保护濒危动物首先是保护它们的野外种群和个体，使它们能够在各自的分布区内满足生存的基本要求(包括食物、水、隐蔽物、栖息环境、繁殖条件等)。不得惊忧和捕杀野生濒危动物，未经许可不能私自动物种群是保护濒危动物的关键，它直接关系到濒危动物能否生存和延续它们的种群。

2.栖息地的保护

保护濒危动物的生存环境、取食区域、繁殖条件、求偶或迁徙通道，是恢复濒危动物种群的重点工作。中国已经建立了保护对象为野生动物的自然保护区100多处。这些保护区的建立，对保护濒危动物种群起到了重要的作用。

3.建立救护和繁殖种群

对很难在自然状态条件下繁衍或是种类数量已经达不到自然扩大种群的濒危动物。应特别批准救护繁殖单位采取人工繁殖措施和饲养的自然繁殖，为濒危动物扩大种群创造条件。对增殖后的濒危动物种群，应采取两种方法扩大种群;一是选择繁殖基群(亲本群)继续在当地繁殖后代，增加濒危动物的数量基数。二是将新繁殖群(子代群)释放回原分布共栖息地，或适合它们栖息的其它地区，以恢复和扩大该濒危动物的野外数量。

4.减少和消除不利因

人口的增长，粮食产地的开垦，城市的扩大，湖泊、湿地的开发、森林的减少、河流的污染，这些人为因素和经济活动却无时不在干扰和影响着野生动物的繁衍生息。应当采取必要和有效的措施，限制、减少和延缓这些不利因素对野生动物。

5.加强管理，严惩偷猎

3.旅行的好处英语作文中英对照 篇三

Travel is beneficial to us in at least three ways. First, by traveling we can enjoy the beautiful scenery in different places. We will see with our own eyes many places read of in books, and visit some famous cities and scenic spots.

Second, we will meet people with different interests and see strange and different things when we travel. We can get ideas of the conditions and customs of other people, taste different foods and local flavours if we like. In this way, we can understand how differently other people live.

Third, travel will not only help us to gain knowledge of geography and history and other knowledge, which will arouse our deep love for our motherland, but also will help us keep healthy and make u s less narrow-minded . Travel does benefit us both mentally and physically .

With all these advantages of travel, it is no wonder that travel has now become more popular than ever in China.

旅游有利于我们至少在三个方面。首先,通过旅游我们可以享受美丽的风景在不同的地方。我们用自己的眼睛会看到许多地方阅读的书籍,并参观一些著名的城市和景点。

第二,我们将与不同的利益和满足人们看到奇怪的和不同的东西,当我们旅行。我们可以得到别人的条件和海关的想法,如果我们喜欢品尝不同的食物和地方风味。通过这种方式,我们可以了解不同的.人。

第三,旅游不仅能帮助我们获得的地理和历史知识和其他知识,这将激发我们热爱我们的祖国,还可以帮助我们保持身体健康和减少美国心胸狭窄。旅行的好处我们无论在心理上还是身体上。

与所有这些旅行的好处,难怪旅游现在已经成为在中国比以往更受欢迎。

4.英语作文我的生日派对中英对照 篇四

Every year， when it’s birthday， my parents hold a party for me。 They invite my friend to come to my house to celebrate my birthday。 I can get many beautiful gifts every year。

In my party， we can do many things：

1。 Light the candles。

2。 Sing a “Happy Birthday” song。

3。 Make a wish。

4。 Blow out the candles。

5。 Cut off the cake。

6。 Eat the cake。

7。 Open the presents。

8。 Sing and dance。

9。 Watch videos or play other games。

10。 Say goodbye with each other。

That’s my birthday party， is it interesting？

每一年，当它的生日，我的父母举办晚会我。他们邀请我的.朋友来我家给我庆祝生日。我每年都可以得到许多美丽的礼物。

在我党，我们可以做很多事情：

1。点燃蜡烛。

2。唱“生日快乐”歌。

3。一个愿望。

4。吹熄蜡烛。

5。切断蛋糕。

6。吃的蛋糕。

7。打开礼物。

8。又唱又跳。

9。观看视频或玩其他游戏。

10。告别彼此。

5.外资模具英语(中英对照) 篇五

54. Mould halves requiring accurate alignment of core and cavity,and shut off should have appropriate part line locks. 上、下模需要精确配合或有擦位的地方， 模具一定要有直身锁。

55. Mould requiring heating should have insulator plate. 需要加热的模具，必须有隔热板。

56. Mould preferred to run automatic; self-degating wheneverpossible. 模具最好能自动生产，模具尽可能自断水口。

57. No obstructions on buttom surface of mold? 模具必须稳定位置如有凸出物请加脚座，是否完成?

58. Overall mold size of the moldbase & shut height 模坯长宽和模厚(模架的长宽)

59. Outlets accessible and marked “ IN OUT and NUMBER”? 出入水位有否打上IN 、OUT 字码?

60. Protruding items shown and protected. 画出突出部件并做好保护。

61. Parting line at the acceptable surface. 合模分布在合理可接受的表面。

62. Put waterline as much as possible/wherever possible. 尽可能布置多的运水。

63. Put waterline for slide /lifter/insert wherever possible. 尽可能在行位、斜、镶件布置运水。

64. Parting line cleared and released properly? 分模线是否正确?

65. Proper locating ring and diameter? 定位圈尺寸及直径是否正确?

66. Proper radius and orifice on sprue bushing and keyed.唧嘴R及管钉是否正确?

67. Part line lock recommended when there is shut off. 当有擦位时，最好有直身锁保护。

68. Protruding items shown and protected. 如有零件凸出，模坯请加保护物。

69. Proper K.O. holes size and location. 顶棍孔尺寸及位置是否正确?

70. Runners to be balanced. 流道必平衡。

71. Runners cross section type and size as per standard. 流道切面形状和尺寸符合标准。

72. Runner and parts should be ejected automatically .Multipleejection should be avoided. 顶出方法可使流道与产品自动掉下，避免运用多次顶出方法。

73. Sufficient view and section. 足够的视图和切面图。

74. Safety Strap in red. 模块藏入模坯，要涂成红色。

75. Standing steel supported to keep stable. 加撑脚以保前、后模能平稳放置。

76. Support pillars>50% part projection area , steel :1040。 撑头面积大于50%的产品投影面积，材料：1040。

77. Safety strap clear tie bar? 锁模块与哥林柱冲突吗?

78. Sucker with reverse 10 deg. Undercut. 10度倒扣的流道拉料杆。

79. Steel type & hardness of slide &heel blocks. 行位和压条的料号和硬度。

80. Sufficient stroke of lifters(1/16“+ undercut size)? 斜顶是否有足够的行程(1/16”+倒扣尺寸)?

81. Sufficient stroke for floating plate? 浮动板是否有足够的行程?

82. Sufficient stroke as well as part and runner falls clear. 是否有足够的行程使品和流道脱落?

83. Spring around return pins and press ratio<33? 是否有回针的弹簧及其压缩比(<33%)?

84. Special instruction stamped on top and operator side? 客户如有特别指示请打在模坯顶及操作面上，有否完成?

85. Screws tight and all installed? 螺丝是否全部收紧?

86. Support posts ground and screwed to clamp plate and pre-loaded. 撑头是否高出方铁?

87. Spring pockets correct depth , spring deflection max.40%? 全部弹弓压缩比是否为1/3 ?

88. Standing steel well supported? 成品与内模之间的钢材是否足够?

89. Single drop of cold sprue gating is designed after moldflowanalysis, which ensures a balance flow of plastic and easy for moulding. 用moldflow分析决定产品的入水位置，使胶料分流平均，易于注塑。

90. Self-degating whenever possible .Hot runner system should beconsidered.…… 热流道系统应该加以考虑。

91. Standard components should be used. 尽量使用标准件。

92. Semi-automatic and use of mould release acceptable. 半自动工手放镶件也可。

93. Update title block/revision. 更新标题栏/版本。

94. Use standard components when appropriate. 适当的时候使用标准件。

95. View of deepest point 最深点(位置)的剖切视图

96. Water circuits should run out form the ejection box. 运水应从出水槽中流出。

97. Waterlines clear tie bar and clamp slot? 运水是否同哥林柱和模槽有冲突?

98. Will mould fit in quoted press? 可否配合客户啤机?

99. Waterlines clear tie bars. 运水喉咀接驳位要离开啤机呵林柱咀接驳。

6.拯救濒危动物作文 篇六

全校同学们都来到操场上，主席台中间矗立着一个捐款箱，校长简单介绍后开始进行捐款仪式。校长，老师们依次走到捐款箱，投进了捐款，各班的班干部也带着全体同学的心愿走上捐款席，用一张写着多少钱，捐款慢慢地投了进去，同学们默默地注视着，脸上充满了自豪。

“一年级一班捐款125元......五年级六班捐款145元......总收到捐款4千多元，感谢同学们的爱心!”校长宣读完毕，操场上响起热烈的掌声。

7.机械专业英语文章中英文对照 篇七

NUMERICAL CONTROL

Numerical control(N/C)is a form of programmable automation in which the processing equipment is controlled by means of numbers, letters, and other symbols, The numbers, letters, and symbols are coded in an appropriate format to define a program of instructions for a particular work part or job.When the job changes, the program of instructions is changed.The capability to change the program is what makes N/C suitable for low-and medium-volume production.It is much easier to write programs than to make major alterations of the processing equipment.There are two basic types of numerically controlled machine tools：point—to—point and continuous—path(also called contouring).Point—to—point machines use unsynchronized motors, with the result that the position of the machining head Can be assured only upon completion of a movement, or while only one motor is running.Machines of this type are principally used for straight—line cuts or for drilling or boring.The N/C system consists of the following components：data input, the tape reader with the control unit, feedback devices, and the metal—cutting machine tool or other type of N/C equipment.Data input, also called “man—to—control link”, may be provided to the machine tool manually, or entirely by automatic means.Manual methods when used as the sole source of input data are restricted to a relatively small number of inputs.Examples of manually operated devices are keyboard dials, pushbuttons, switches, or thumbwheel selectors.These are located on a console near the machine.Dials ale analog devices usually connected to a syn-chro-type resolver or potentiometer.In most cases, pushbuttons, switches, and other similar types of selectors are digital input devices.Manual input requires that the operator set the controls for each operation.It is a slow and tedious process and is seldom justified except in elementary machining applications or in special cases.In practically all cases, information is automatically supplied to the control unit and the machine tool by cards, punched tapes, or by magnetic tape.Eight—channel punched paper tape is the most commonly used form of data input for conventional N/C systems.The coded instructions on the tape consist of sections of punched holes called blocks.Each block represents a machine function, a machining operation, or a combination of the two.The entire N/C program on a tape is made up of an accumulation of these successive data blocks.Programs resulting in long tapes all wound on reels like motion-picture film.Programs on relatively short tapes may be continuously repeated by joining the two ends of the tape to form a loop.Once installed, the tape is used again and again without further handling.In this case, the operator simply loads and1

unloads the parts.Punched tapes ale prepared on type writers with special tape—punching attachments or in tape punching units connected directly to a computer system.Tape production is rarely error-free.Errors may be initially caused by the part programmer, in card punching or compilation, or as a result of physical damage to the tape during handling, etc.Several trial runs are often necessary to remove all errors and produce an acceptable working tape.While the data on the tape is fed automatically, the actual programming steps ale done manually.Before the coded tape may be prepared, the programmer, often working with a planner or a process engineer, must select the appropriate N/C machine tool, determine the kind of material to be machined, calculate the speeds and feeds, and decide upon the type of tooling needed.The dimensions on the part print are closely examined to determine a suitable zero reference point from which to start the program.A program manuscript is then written which gives coded numerical instructions describing the sequence of operations that the machine tool is required to follow to cut the part to the drawing specifications.The control unit receives and stores all coded data until a complete block of information has been accumulated.It then interprets the coded instruction and directs the machine tool through the required motions.The function of the control unit may be better understood by comparing it to the action of a dial telephone, where, as each digit is dialed, it is stored.When the entire number has been dialed, the equipment becomes activated and the call is completed.Silicon photo diodes, located in the tape reader head on the control unit, detect light as it passes through the holes in the moving tape.The light beams are converted to electrical energy, which is amplified to further strengthen the signal.The signals are then sent to registers in the control unit, where actuation signals are relayed to the machine tool drives.Some photoelectric devices are capable of reading at rates up to 1000 characters per second.High reading rates are necessary to maintain continuous machine—tool motion；otherwise dwell marks may be generated by the cutter on the part during contouring operations.The reading device must be capable of reading data blocks at a rate faster than the control system can process the data.A feedback device is a safeguard used on some N/C installations to constantly compensate for errors between the commanded position and the actual location of the moving slides of the machine tool.An N/C machine equipped with this kind of a direct feedback checking device has what is known as a closed-loop system.Positioning control is accomplished by a sensor which, during the actual operation, records the position of the slides and relays this information back to the control unit.Signals thus received ale compared to input signals on the tape, and any discrepancy between them is automatically rectified.In an alternative system, called an open—loop system, the machine is positioned solely by stepping motor drives in response to commands by a controllers.There is one basic type of NC motions.Point-to-point or Positional Control In point-to-point control the machine tool elements(tools, table, etc.)are moved to programmed locations and the machining operations performed

after the motions are completed.The path or speed of movement between locations is unimportant;only the coordinates of the end points of the motions are accurately controlled.This type of control is suitable for drill presses and some boring machines, where drilling, tapping, or boring operations must be performed at various locations on the work piece.Straight-Line or Linear Control Straight-Line control systems are able to move the cutting tool parallel to one of the major axes of the machine tool at a controlled rate suitable for machining.It is normally only possible to move in one direction at a time, so angular cuts on the work piece are not possible, consequently, for milling machines, only rectangular configurations can be machined or for lathes only surfaces parallel or perpendicular to the spindle axis can be machined.This type of controlled motion is often referred to as linear control or a half-axis of control.Machines with this form of control are also capable of point-to-point control.The original N/C used the closed—loop system.Of the two systems, closed and open loop, closed loop is more accurate and, as a consequence, is generally more expensive.Initially, open—loop systems were used almost entirely for light-duty applications because of inherent power limitations previously associated with conventional electric stepping motors.Recent advances in the development of electro hydraulic stepping motors have led to increasingly heavier machine load applications.中文译文

数控技术

数控是可编程自动化技术的一种形式,通过数字、字母和其他符号来控制加工设备。数字、字母和符号用适当的格式编码为一个特定工件定义指令程序。当工件改变时,指令程序就改变。这种改变程序的能力使数控适合于中、小批量生产,写一段新程序远比对加工设备做大的改动容易得多。

数控机床有两种基本形式：点位控制和连续控制(也称为轮廓控制)。点位控制机床采用异步电动机,因此,主轴的定位只能通过完成一个运动或一个电动机的转动来实现。这种机床主要用于直线切削或钻孔、镗孔等场合。

数控系统由下列组件组成：数据输入装置,带控制单元的磁带阅读机,反馈装置和切削机床或其他形式的数控设备。

数据输人装置,也称“人机联系装置”,可用人工或全自动方法向机床提供数据。人工方法作为输人数据唯一方法时,只限于少量输入。人工输入装置有键盘,拨号盘,按钮,开关或拨轮选择开关,这些都位于机床附近的一个控制台上。拨号盘通常连到一个同步解析器或电位计的模拟装置上。在大多数情况下,按钮、开关和其他类似的旋钮是数据输入元件。人工输入需要操作者控制每个操作,这是一个既慢又单调的过程,除了简单加工场合或特殊情况,已很少使用。

几乎所有情况下,信息都是通过卡片、穿孔纸带或磁带自动提供给控制单元。在传统的数控系统中,八信道穿孔纸带是最常用的数据输入形式,纸带上的编码指令由一系列称为程序块的穿孔组成。每一个程序块代表一种加工功能、一种操作或两者的组合。纸带上的整个数控程序由这些连续数据单元连接而成。带有程序的长带子像电影胶片一样绕在盘子上,相对较短的带子上的程序可通过将纸带两端连接形成一个循环而连续不断地重复使用。带子一旦安装好,就可反复使用而无需进一步处理。此时,操作者只是简单地上、下工件。穿孔纸带是在带有特制穿孔附件的打字机或直接连到计算机上的纸带穿孔装置上做成的。纸带制造很少不出错,错误可能由编程、卡片穿孔或编码、纸带穿孔时的物理损害等形成。通常,必须要试走几次来排除错误,才能得到一个可用的工作纸带。

虽然纸带上的数据是自动进给的,但实际编程却是手工完成的,在编码纸带做好前,编程者经常要和一个计划人员或工艺工程师一起工作,选择合适的数控机床,决定加工材料,计算切削速度和进给速度,决定所需刀具类型,仔细阅读零件图上尺寸,定下合适的程序开始的零参考点,然后写出程序清单,其上记载有描述加工顺序的编码数控指令,机床按顺序加工工件到图样要求。

控制单元接受和储存编码数据,直至形成一个完整的信息程序块,然后解释数控指令,并引导机床得到所需运动。

为更好理解控制单元的作用,可将它与拨号电话进行比较,即每拨一个数字,就储存一个,当整个数字拨好后,电话就被激活,也就完成了呼叫。

装在控制单元里的纸带阅读机,通过其内的硅光二极管,检测到穿过移动纸带上的孔漏

过的光线,将光束转变成电能,并通过放大来进一步加强信号,然后将信号送到控制单元里的寄存器,由它将动作信号传到机床驱动装置。

有些光电装置能以高达每秒1000个字节的速度阅读,这对保持机床连续动作是必须的,否则,在轮廓加工时,刀具可能在工件上产生划痕。阅读装置必须要能以比控制系统处理数据更快的速度来阅读数据程序块。

反馈装置是用在一些数控设备上的安全装置,它可连续补偿控制位置与机床运动滑台的实际位置之间的误差。装有这种直接反馈检查装置的数控机床有一个闭环系统装置。位置控制通过传感器实现,在实际工作时,记录下滑台的位置,并将这些信息送回控制单元。接受到的信号与纸带输入的信号相比较,它们之间的任何偏差都可得到纠正。

在另一个称为开环的系统中,机床仅由响应控制器命令的步进电动机驱动定位,工件的精度几乎完全取决于丝杠的精度和机床结构的刚度。有几个理由可以说明步进电机是一个自动化申请的非常有用的驱动装置。对于一件事物,它被不连续直流电压脉冲驱使,是来自数传计算机和其他的自动化的非常方便的输出控制系统。当多数是索引或其他的自动化申请所必备者的时候,步进电机对运行一个精确的有角进步也是理想的。因为控制系统不需要监听就提供特定的输出指令而且期待系统适当地反应的公开-环操作造成一个回应环,步进电机是理想的。一些工业的机械手使用高抬腿运步的马乘汽车驾驶员,而且步进电机是有用的在数字受约束的工作母机中。这些申请的大部分是公开-环 ,但是雇用回应环检测受到驱策的成份位置是可能的。环的一个分析者把真实的位置与需要的位置作比较,而且不同是考虑过的错误。那然后驾驶员能发行对步进电机的电脉冲,直到错误被减少对准零位。在这个系统中,没有信息反馈到控制单元的自矫正过程。出现误动作时,控制单元继续发出电脉冲。比如,一台数控铣床的工作台突然过载,阻力矩超过电机转矩时,将没有响应信号送回到控制器。因为,步进电机对载荷变化不敏感,所以许多数控系统设计允许电机停转。然而,尽管有可能损坏机床结构或机械传动系统,也有使用带有特高转矩步进电机的其他系统,此时,电动机有足够能力来应付系统中任何偶然事故。

8.保护濒危动物英语作文「中英对照」 篇八

peopleremainpuzzledinspiteoftheirgreatefforttounderstandtheendlessquestions,sotheyinventedtheall-embracingword---“predestination”.inordertobemoreprecise,differentcombinationswerederivedfromit:lovepredestination,sinfulpredestination,evilpredestination,andkindpredestinationetc.,hencewehavethesayingslike:“predestinationwilldefinitelybringyoutogetherdespitethegreatdistancewhilewithoutpredestination,you’llneverknoweachothereventhoughyouarestandingfacttoface”“adistantcoupleistiedupwiththethreadofpredestination”andeventhephrasesandexpressionslike“thegodofmarriage”,“predestinationwithoutluck”,“luckwithoutpredestination”,“comingacrosseachotherisakindofpredestination”,“enemiesareboundtomeetonanarrowroad”,“theyshallnotmarryeachotherunlesstheyarepredestinedlovers”.ifpeoplestillcannotfindanswers,theyturnto“reincarnation”forhelp.lindaiyuisalwaysintearsjustforrepayingforthewaterjiabaoyuhadgivenherwhenshewasaplantinherpreviouslifeinadreamoftheredmansions.infact,theso-called“predestination”isoftenakindofcoincidenceorchanceencounter,evenakindofaccident.ifyoudon’tmeetthisperson,you’llsurelymeetsomeoneelse.butpeopleinsistonaddingsomecolorsofemotionsorsuperstition,thusgeneratingvariousreligiousfactions,themaintheoriesofwhicharenomorethanthatof“reincarnation”,“heavenandhell”and“theever-lastingsoul”etc.butdoesanyoneknowanythingabouthispreviouslifeorhisafterlife?whatcouldhedoevenifheknewthem?ifhecan’tgraspthepresentlife,what’sthebenefitofcommentingonthevisionaryafterlife?givinguptodayisthesameasgivinguptomorrow,fortheyarecloselyconnected.howabsurditistoworklikethehorseorcattleinthepresentlifeinordertobeaboveothersinthenextlife.haveyoueverseenemperorqinshihuangreincarnate?haveyoueverheardofemperorwudiofthehandynastygoingintoanotherlife?whereisnowmonkxuanzangofthetangdynasty(whatweknowisthebigwildgoosepagoda)?whereisthemonkeyking(theflowerandfruitmountaindoesexist,though)?andwherecanwefindthosegreatemperorssuchasyao,shunyuandtheinfluentialphilosopherslikeconfucius,laoziandzhuangzi?

howmanyheavensdowefind?aretheyalsodividedintotheorientalandtheoccidentalworld?isgodachineseorwesterner?whichisthegreatestreligionamongbuddhism,daoism,christianity,catholicityandislamism?allreligionsadvocatedoinggooddeedsandnotkilling,butwhydotheykeepcontendingagainsteachother,evenfightingandkillingamongthemselves?istheparadisethesameoneinallreligions?there’sonlyonesuninthesky,andthereshouldbeonlyoneemperorinacountry,butdoallreligionsbelieveinthesamegod,ordotheyhavedifferentgodsoftheirown?ifallofusexpectedgod’shelp,wouldn’tgodbetoobusyandtootired?

doesgodrespectscience?ifnot,whydoesheallowcomputersandtelecommunicationstorunrampant?ifitisgodwhocreatedhumanbeings,thendoesn’thefeeloutofcontrolofwhatthehumanbeingaredoingnow(thenuclearweaponsandbio-chemicalweapons,etc.)?

wehumanbeingshaveanorigin,andisitthesamewithgod?doesgodgetmarried?isgodhereditary,orisitthesameever-lastingone?

9.保护濒危动物英语作文「中英对照」 篇九

Yangzhou University, Jiangsu, 22500

1Cell:1385240937

5Xiangbin Bu

Dear Sir/Madam:

I am a senior at Yangzhou University and expect to graduate in July 2006.I take the liberty of writing you to apply for a position in your hospital.Majoring in Gynecology and Obstetrics Sciences, I have been doing great in it!I performed well in both fundamental courses such as probability and statistics and major-related courses.Thanks to my hard working and firm grasp of knowledge, I performed well in my main courses in the past three consecutive years.Also worth mentioning is my Computer proficiency.I have been the clerk of network of my school.What’s more, I have been paying close attention to improving abilities and skills of dealing with real world problems throughout the college life.Through various practical activities and part-time jobs, I have substantially strengthened my skills of problem-solving and communication.As far as my personality is concerned, I am an enthusiastic and dedicated person who would never yield to difficulties easily.I am willing to work hard and long independently as well in my work team to accomplish the task at the best level.In addition, I have inquisitive and analytical mind, tact and good sense of humor.Enclosed with this letter is my resume, which provides further details regarding my educational backgrounds and achievements.please feel free to contact me if there is anything I could do to facilitate your assessment.If I am hired, I will prove myself one of the most valuable assets you ever have in your business.Thank you for your time and consideration.Your prompt reply in this matter would be greatly appreciated.Sincerely yours,Xiangbin Bu

中英自荐信对照

好范文---医学专业

尊敬的医院领导：

您好!我叫卜祥滨，是扬州大学医学院2006届妇产科学专业本科毕业生。我热爱医学事业，带着对贵医院的仰羡和优秀的专业素质的了解，希望能以自信和真诚叩开贵医院成功的大门。我希望应聘贵医院妇产科医生一职。下面请允许我介绍一下我自己。

2001年我毕业于山东省安丘市第四中学，以优异的成绩考入了扬州大学医学院。五年来，学校良好的学习条件，浓厚的学术氛围，为我提供了一个学习科学文化知识，提高自身综合素质的优良环境。在这样的一个环境下，我始终以严谨的学习态度，刻苦学习专业知识，提高实际能力。

在校学习阶段，除了拓宽知识面、完善知识结构以外，我更加注重自学能力、实践能力和独立解决问题的能力的培养。自2005年6月起，我开始在江苏省苏北人民医院实习一年的时间。实习期间，我坚持虚心认真的学习态度，服从带教老师的领导，受到指导老师和病人的一致好评。通过在各科室的实习，我了解了各科医疗工作的特点，掌握了病史采集及病历书写，病程记录以及各种诊疗技术的基本操作等，为毕业后能独立地从事各科室医疗第一线工作打下了较好的基础。特别是在妇产科为期半年的实习，我熟练扎实的掌握了妇产科常见疾病的诊断和治疗原则，妇产科各种疾病的检查方法和各种疾病的临床操作技能。同时，我积极学习英语，具有较高的英语听，说，读，写能力。取得了省计算机二级证书(C语言)，有较强的网页制作、网络管理和软件编程能力。在校期间，我担任学校论坛的管理员，在团队协作和组织管理方面得到了很大的锻炼。我自信我具有：高度的责任感、严谨的工作作风、敬业精神和协作精神，能很好的协助上级医师解决疑难病例;较强的自学能力和接受新事物的能力，能很好的解决临床实际问题。

未来充满着机遇和挑战，作为一名即将踏入社会的大学生，我深知所有的成绩只能代表过去，应该始终保持虚心的学习态度和务实的精神，脚踏实地作好每一件事情。

贵医院在社会上具有高度的知名度，具有科学的管理理念，先进完备的医疗设备和众多热爱医疗事业的医务工作者。我希望能够到贵医院参加工作，继续学习，发挥才干，实现自己的人生价值。成功源于自信，真心希望为贵单位的明天尽我的一份绵薄之力!

您给我一份信任，我将还你以夺目的光彩!

此致

敬礼

求职人：卜祥滨

April 13,2000

p.O.Box 36

BIIT University

Beijing,China 100000

Dear Sir/Madam:

Are you searching for a telecommunications manager with expertise in project management and team leadership?

I specialize in creating and implementing high-performance strategies that directly impact growth and profitability of large telecommunications companies.In addition to my knowledge of business processes, I also offer proficiency in telecom software development and cutting-edge technologies.I am relocating to Shenzhen and would be interested in opportunities with your firm.Currently, I serve as manager for BIT Company‘s Information Industry Division.Briefly, some of my accomplishments include:

Developed a tool to track and forecast price,quantity,and revenue, which enables client to monitor business performance

Implemented a customized end-to-end testing process and SQL database

10.励志英语(中英对照) 篇十

Good luck is when an opportunity comes along and you’re prepared for it.努力过，失败过，没关系。屡战屡败，屡败屡战，每一次失败都比上一次更好。Ever tried, ever failed.No matter, try again, fail again.Fail better.对于现状的不满，不能只是抱怨，要有勇气做出改变。

If you are not satisfied with the live you living, don’t just complain, do something about it.靠过去完成的无法让人保有成功，必须在路上持续交出成绩。

A fellow doesn’t last long on what he has done, he’s got to keep on delivering as he goes on.别低估了慷慨的力量。

Generosity is its own form of power.成功无法保证，并非唾手可得。成功必须靠自己去争取。

Success is not guaranteed.It is not handed to you, Success is earned.如果你独处时感到寂寞，说明没有把自己陪好。

If you’re lonely when you are alone, you’re in bad company。

父亲最大的梦想就是孩子的生活是充满欢乐的。

A father’s greatest dream is that his child’s life is filled with joy。

你的从内心深处找到一种可以忍受一切痛苦的坚强力量时，你的成长历程就会出现飞跃。The turning point in the process of growing up is when you discover the core of strength within you that survives all hurt。

伟大的门将不是靠神奇的扑救成就的，而是靠注重小事和细节。

It’s not about making the amazing saves.It’s the little things and small things that made great gatekeepers great.不要等待好事降临，你要向幸福进发。

Don’t wait for good things to happen to you.You need walk towards happiness.有时候要到达谷底，才会慢慢变好。

Sometimes things have to fall apart to make way for better things.我会回去，找到你，爱你，娶你，活的光明正大。

I will return, find you, love you, marry you and live without shame.热爱生活，生活也会厚爱你。

If you love life, life will love you back.你是什么样的人和你想成为什么样的人的差距就是你做了什么。

The difference between who you are and who you want to be is what you do.你需要尽你所能，最大限度的努力，只要你这么做，只要你能保持乐观，你就会看见乌云背后的幸福线。

You have to do everything you can, you have to work your hardest.And if you do, if you stay positive, then you have a shot at a silver lining.请记住，幸福不在于你是谁或者你拥有什么，而仅仅取决于你的心态。

Remember, happiness doesn’t depend upon who you are or what you have, it depends solely upon what you think.无论未来何去何从，我们在一起的每一年都是我人生中最辉煌的日子，我永远属于你。No matter what happen to us in the future, every day we are together is the greatest day of my life, I will always be yours.生活变得美好，不是偶然，而是我们努力改变的结果。

Life gets better not by chance, but by change.人生不如意之事十之八九。

Sometimes things just don’t work out the way you thought they would.追寻自己，追求挑战、希望、爱情、愤怒、感恩，追寻光阴，追寻黑暗、追寻一切，不留恋过往。

Claim yourself in defiance, in hope、in love、in fury、in gratitude、claim the light ,claim the dark ,claim it all ,nothing can stay。

当我们下定决心面对世界上所有的事物，包括荆棘难题，就已经打赢了半场战役。

We win the battle when we make up our minds to take the world as we find it, including the thorns.从今天开始，我要积极地接受一切，接受爱，迎接挑战，拥抱生活；不管什么我都会勇敢地接受。

From now on , I am gonna say yes to love, yes to adventure, yes to life, whatever it maybe, the answer’s going to be yes.正真地友情是，即使两个人不说话，也觉得很舒服。

True friendship comes when the silence between two people is comfortable.生活就是這樣，你一直想要得到的東西，總在你不指望的那一刻姍姍來遲。

It is the rule of life that everything you have always wanted comes the very second you stop looking for it.有理想，却不愿为之努力，那是空想。

There’s no point having wishes if you don’t at least try to do them.上天会把你带走，看着你，对你说，只有一件事可以让灵魂完整，那就是爱。

Heave will take you back and look at you and say ,“only one thing can make a soul complete-and that thing is love”.目标有价值，生活才有价值。

Life has a value only when it has something valuable as its object.最美好的事是看到某人的微笑；更美好的事是她因你而微笑。

The most beautiful thing is to see a person smiling.And even more beautiful is, knowing that you are the reason behind it.生活中要记住三个单词：选择、机会和改变。你必须做出选择，抓住机会，否则你的生活只会一成不变。

The 3’cs of life:choice, chance and change, you must make a choice to take a chance or your life will nerve change.世间万物都处在微妙的平衡中。

Everything you see exists together in delicate balance.生活就像淋浴，方向转错，水深火热。

Life is like a shower, one wrong turn and you’re in hot water.Love and sense are enemies at any age.在任何年龄，爱与理性都是对立的。

Doing the best at this moment puts you in the best place for the next moment.这一刻全力以赴，下一刻便可抢占先机。

Opportunities are not offered, they must be wrested and worked for.And this calls for perseverance and courage.有时候，最难的并非是放下过去，而是学会重行开始。

Sometimes the hardest part is not letting go, but rather, learning to start over.要走得快，就一个人走；要走的远，就一起走。

If you want to go fast, go alone;If you want to go far, go together.一见钟情只是瞬息之间，而对爱大彻大悟却需要很多年。

It takes no time to fall in love, but it takes you years to know what love is.上天就像导演电影那样安排我们的人生，中间的起起伏伏，为的只是做好的完美收场。God’s plan is like a movie.All the good and bad things are arranged together for the good ending.沉湎于虚幻的梦想而忘记现实的生活是毫无益处的。

It does not do to dwell on dreams and forgot to live.(dwell :居住于、存在于)

得意时，朋友识我。失意时，我识朋友。

In prosperity our friends know us.In adversity we know our friends.（adversity:逆境、不幸、灾难）

迈向任何地方的第一步，就是下决心不在原地踏步。

The first step towards getting somewhere is to decide that you are not going to stay where you are.每段故事都有一个结局，但是在人的一生中，每个终点同时也是一个新的起点。Everything has an end.But in life, every ending is just a new beginning.生活不是发现你自己，而是创造你自己。

Life is not find yourself, life is creating yourself.不去尝试，就什么也不可能。

Anything unattempted remains impossible.有时候，幸福只需转变一下自己的态度。

Sometimes happiness is just a matter of attitude adjustment.不必变得强壮，而是让内心强大。

It’s not always necessary to be strong, but to feel strong.如果你等的船没有向你驶来，那你就朝它游过去吧。

If your ship doesn’t come in, swim out to it.每天醒来都要变得比昨天更强大，只是恐惧，擦干泪水。